GSEOS Explorer

Previous  Top  Next

The GSEOS Explorer window allows you to control and monitor the GSEOS system status. You can monitor the currently installed Alarms, Blocks, Commands, Conversions, Decoders, Expressions, Monitors, Network connections, and System status. The System node gives access to system parameters and performance data. In the network section you can monitor and modify your network connections.

You invoke the GSEOS Explorer from the main menu Tools/Explorer, or the Toolbar:



These selections toggle the GSEOS Explorer window between floating and pinned mode. If you want to pin the Explorer to a different desktop page check the instructions in the chapter on Desktop Management.

The Explorer window itself consists of two panes, similar to the Windows Explorer interface. On the left hand side you select the specific node you are interested in, on the right hand side you will see the detail information about the selected node. In the figure below the Net/Clients node is selected and you can see the client connection status on the right hand side.